Digital Works ReZAP Battery Doctor Guide D'utilisation Et D'entretien page 15

REZAP® RBC-883 SPECIFICATIONS
Microcontroller
Input Voltages
Output Rating
Supported Battery
Sizes
Supported Battery
types
Supported Battery
Capacities
(NiCd/NiMH)
Charging Time
Charging Currents
Selection
Battery Tester
Function
Protection
Schemes employed
Safety Compliance
Net Weight
Notes: All trademarks referenced in this User Guide belong to their respective owners.
Specifications subject to change without notice for further product
improvements.
Digital Works' state-of-the-art proprietary Multi-Chemistry battery
charger's high performance 8-bit microprocessor, CMOS, fully static,
employing advanced RISC architecture with integrated analogue-to-
digital converters and multi-channel high speed input/output ports
controlling the whole charging process in real time.
220V - 240V 50Hz for SAA, GS & BS Standards 110V - 120V 60Hz for
UL, CUL & JIS Standards
16.5V max, 4 x 250mA max, 10 Watts max.
1 to 4 x AAAA, AAA, AA, N, C, D & prismatic sizes (1.2 or 1.5V)
1 x 9V and 1 x 6V dolphin/lantern batteries
Alkaline, Titanium, RAM (Rechargeable Alkaline Manganese), NiCd
and or NiMH batteries. (Do not attempt to charge battery type not
specified.)
AA size – Up to 2500mAh
C & D size – Up to 4000mAh
(Do not attempt to charge higher than the above limits as overload
may happen, causing damage to the charger)
1 to 17 hours (time variation depends on type, make, size and
condition of battery)
Fully Automatic
Built-in simulation of voltmeter, which measures the strength of each
battery and displays the voltage level via the 4 x green LEDs.
• Alkaline battery charge-safe protection,
• Faulty battery detection & rejection,
• Overcharge protection,
• Short circuit protection,
• Wrong polarity protection,
• Negative Delta Voltage protection,
• Zero Delta Voltage protection,
• Temperature protection,
• Timer protection.
• AS/NZS 3108:1994; AS/NZS 3350.1:2000; AS/NZS 3350.2.29:2001
• EN 206041A; EN 60335.1; EN 60335.2.29 & CE (EN50082-1)
• EMC; C-Tick (AS/NZS 1044:1995) & FCC Part 15 Class B
• UL 1310 – Fourth Edition – Class 2 Power Units
• CSA Standard C22.2 No. CAN/CSA-223-M91
• CSA Informs – Power Supplies No. 3
1Kg.
15