Selecting The Digital Attenuator (Dig.att); Selecting The Contrast (Contrast) - Pioneer Supertuner III FH-P8800 Mode D'emploi

Selecting the Digital Attenuator (DIG.ATT)

When listening to a CD or other source on which the recording level is high, setting the
equalizer curve level to "H" (high) may result in distortion.
You can switch the digital attenuator to "L" (low) to reduce distortion. (Sound quality
when the setting is "H" (high) is better than when the setting is "L" (low), so usually set to
"H" (high).)
1. Press the FUNCTION button and select the Digital Attenuator mode
(DIG.ATT) in the Initial Setting Menu.
2. Select the desired attenuation
level with the 2/3 buttons.
L Ô H

Selecting the Contrast (CONTRAST)

You can adjust the contrast of the product's display.
1. Press the FUNCTION button and select the Contrast mode (CONTRAST)
in the Initial Setting Menu.
2. Select the desired Contrast
with the 2/3 buttons.
The display shows "+7" – "–7".
48