Switching The Auxiliary Setting; Switching The Dimmer Setting; Selecting The Brightness - Pioneer Super Tuner 3 DEH-P6400 Mode D'emploi

Initial Settings

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
in the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
AUX :ON

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can switch dimmer on or off.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
DIM
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Dimmer :ON
.
AUX
appears
AUX
between on and
AUX
.
DIM
Dimmer
between on
Dimmer

Selecting the brightness

You can select the display brightness. Initially
this mode is set to 12.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
2 Select the desired brightness with 2/3.
• The display shows –
0
.
BRIGHT
Brightness
.
15
En
Section
07
33