Technical Description; Control Elements; Installing The Kettle Holder - Dometic MCK 750 Notice D'utilisation

Technical description

5 Technical description
The MCK750 kettle is intended for use in vehicles and is connected to a 12 Vg power supply or
24 Vg power supply, e. g. the on-board supply. It can be used to boil up to 750 ml of water.
The car-kettle may only be used in vehicles where the socket is protected with at least a 20 A fuse.
You can find details on the fuse in the vehicle documentation.
The kettle is automatically switched off when the water boils.
5.1

Control elements

The car kettle has the following control elements:
No. in
fig. 1, page 3
3
4
6

Installing the kettle holder

Observe the following installation instructions:
• Make sure the installation location provides sufficient stability.
• Check beforehand that there is sufficient space on the other side for the drill head to come out.
• Make sure no concealed cables are damaged when drilling or screwing.
• Make sure the airbag function is not impaired.
To perform the installation, proceed as follows:
➤ Fasten the kettle holder with the screws supplied.
8
Designation
On/Off switch
Control lamp
MCK750
EN