MCK750
Do not use the device on hot surfaces and do not place it near naked
flames.
Protect the device and the cable against heat and moisture.
Never immerse the device in water.
Do not operate the device when the lid is open.
Do not allow the connection cable to dangle (risk of stumbling).
Do not lay the connection cable over edges or corners.
Store all unattached parts of the kettle safely before starting your jour-
ney.
Descale the kettle regularly.
3
Scope of delivery
No. in
fig. 1, page 2
1
2
–
4
Intended use
The MCK750 kettle is used to boil up to 750 ml of water.
Do not fill the water tank with any other fluids.
5
Technical description
The MCK750 kettle is intended for use in HGVs and is connected to a 12 V DC power
supply (item no. MCK-750-12/N) or 24 V DC power supply (item no. MCK-750-24/N),
e. g. the on-board supply. It can be used to boil up to 750 ml of water.
The car-kettle may only be used in vehicles where the socket is protected with at
least a 20 A fuse. You can find details on the fuse in the vehicle documentation.
The kettle is automatically switched off when the water boils.
5.1
Control elements
The car kettle has the following control elements:
No. in
fig. 1, page 2
3
4
EN
Quantity
Designation
1
Water tank
1
Kettle holder
–
Fastening material
Designation
On/Off switch
Control lamp
Scope of delivery
13