Proper Use; Technical Data - Indexa DF400K Mode D'emploi

Operating instructions
GB
1. Introduction
Read through these operating instructions fully and carefully. The operating
instructions belong to this product and contain important points concerning
bringing the appliance into service and ist operation. Also read the operating
instructions of the basic set.
Always pay attention to all safety instructions. Should you have any questions
or be unsure about operating the appliance ask a specialist. Keep these
instructions in a safe place and should the need arise pass them on to a third
party.

2. Proper use

The additional wireless observation camera consists of camera DF400K and
the mains adaptor. The additional camera is an optional accessory for DF400
Set. It is to be used for the surveillance of rooms, entrance hallways,
driveways etc. through video pictures and sound. The video and audio
transmission is wireless using a frequency of 2.4 GHz.
The power for the DF400K is supplied through the supplied mains adapter
connected to a 230 V AC, 50Hz mains supply.
If there is sufficient light a colour picture will be transmitted. At low ambient
light levels the integrated Infrared LEDs are automatically switched on. In this
case the immediate area (max. 14 m) will be illuminated and the video picture
switches to black and white mode for improved light sensitivity. The picture
quality is optimised for day and night opereation by an internal mechanical
filter change. If the surveillance is specifically required in a dark environment,
then additional lighting should be installed.
Up to four wireless cameras DF400K can be used with one smart recorder. The
camera channels can be manually selected or automatically displayed in
sequence if the scan mode is selected. They can also be viewed at the same time
on a split screen (various split formats possible).
The wireless transmission is digital and on constantly changing frequencies
(frequency hopping) which are synchronised between the camera and the
smart recorder. Only the smart recorder which has been "paired" with the
camera can receive the synchronised signals. This security feature prevents
access of the camera signal by third parties.
The camera is weatherproof (Protection class IP66) and can be used not only
indoors but also for mounting outside. Wherever possible it should be protected
from direct rainfall. The monitor and both mains adapters are for indoor use
only and must be protected from moisture.
The set is for use in private households. A video surveillance system does not
replace your duty of care or supervision. Observe the regulations concerning
video surveillance in commercial and public areas.
Any other use or modification of the device is not authorised. No liability will be
accepted for consequential damages or for damages caused by improper use or
incorrect operation. No liability will be accepted for consequential damages
caused by any function or by malfunction. Unless any liability is specifically
required by law, claims for damages, in particular those for personal injury or
property damage caused by non-functioning or malfunctioning of the machine,
are excluded.
12 - GB
This appliance is not intended to be used by people (including children) with
restricted physical, sensory or mental capacities, or a lack of experience and/or
knowledge, unless they are supervised by, or receive instructions how to use the
appliance from a person responsible for their safety.
3. Package contents
!
Camera with connection cable to mains adapter
!
Antenna
!
Mains adapter 5VDC
!
Camera bracket with screws and plugs
!
User manual

4. Technical data

Camera DF400K
Operating Voltage
Current consumption
Picture sensor
Viewing angle
Light sensitivity
Infrared filter
Illumination
Illumination distance
Microphone
Protection class
Dimension of housing
Operating temperature
Mains Adapter
Operating Voltage
Output
5. Features and Equipment
1 Motion sensor
2 Power LED
3 Infrared LEDs
4 Daylightsensor
5 Lens
6 Connection-LED
7 Antenna
8 Bracket
9 Wing screw
10 Antenna connection
11 Fixing hole for bracket
12 Microphone
13 Triangular nut
14 Pairing button
15 Mains adapter connection
16 Plugs
17 Mains adapter
18 Screws
(s. fig. A)
"
5 V DC (mains adapter)
500 mA
1/4" CMOS
approx. 55° horizontal, approx. 44° vertical
1 Lux (w/o IR-LEDs)
automatic change
6 Infrared LEDs
max. 14 m
built in
IP 66
123 x Ø 60 mm
- 10° C to + 40° C
230 V ~ 50 Hz
"
5 V , 1,0 A
(s. fig. A)