Proper Use; Package Contents; Features And Equipment; Technical Data - Indexa DF200KA Mode D'emploi

Operating instructions
GB
1. Introduction
Read through these operating instructions fully and carefully. The operating
instructions belong to this product and contain important points concerning
bringing the appliance into service and ist operation. Also read the operating
instructions of the basic set.
Always pay attention to all safety instructions. Should you have any questions
or be unsure about operating the appliance ask a specialist. Keep these
instructions in a safe place and should the need arise pass them on to a third
party.

2. Proper use

The digital wireless camera set consists of the camera DF200KA and the mains
adaptor.The additional camera is an optional accessory for a DF200 series set
which contains an receiver/monitor. It is to be used for the surveillance of
rooms, entrance hallways, driveways etc. through video pictures and sound.
The video and audio transmission is wireless using a frequency of 2.4GHz.
The power for the DF200KA is supplied through the supplied mains adapter
connected to a 230VAC, 50Hz mains supply.
If there is sufficient light a colour picture will be transmitted. At low ambient
light levels the integrated Infrared LEDs are automatically switched on. In this
case the immediate area (within 15 m indoors and 10 m outdoors) will be
illuminated and the video picture switches to black and white mode for
improved light sensitivity. An internal infrared filter is switched to the improve
daytime and nighttime picture quality. If the surveillance is specifically
required in a dark environment, then additional lighting should be installed.
Up to four wireless cameras DF200KA can be used with one monitor/receiver.
The camera channels can be manually selected or automatically displayed in
sequence if the scan mode is selected. Depending on the model the camera
pictures can also be observed simultaneously in quad-split screen mode.
The wireless transmission is digital and on constantly changing frequencies
(frequency hopping) which are synchronised between the camera and the
monitor. Only the receiver which has been "paired" with the camera can receive
the synchronised signals. This security feature prevents access of the camera
signal by third parties.
The camera is weatherproof (Protection class IP66) and can be used not only
indoors but also for mounting outside. Wherever possible it should be protected
from direct rainfall. The receiver and both mains adapters are for indoor use
only and must be protected from moisture. The set is for use in private
households. A video surveillance system does not replace your duty of care or
supervision. Observe the regulations concerning video surveillance in
commercial and public areas.
Any other use or modification of the device is not authorised. No liability will be
accepted for consequential damages or for damages caused by improper use or
incorrect operation. No liability will be accepted for consequential damages
caused by any function or by malfunction. Unless any liability is specifically
required by law, claims for damages, in particular those for personal injury or
property damage caused by non-functioning or malfunctioning of the machine,
are excluded.
This appliance is not intended to be used by people (including children) with
restricted physical, sensory or mental capacities, or a lack of experience and/or
knowledge, unless they are supervised by, or receive instructions how to use the
appliance from a person responsible for their safety.

3. Package contents

! DF200KA camera with connection cable to mains adapter
! Radial antenna 3dB
! Mains adapter 5 VDC
! Camera bracket with screws and plugs
! User manual

4. Features and Equipment

Camera DF200KA (s. Fig. A)
1 Sunshield
2 screw
3 Camera housing
4 Mains adapter connection
5 "Pairing"-Button
6 Antenna connection
7 Microphone
8 3 dB radial antenna
9 Power LED
10 Infrared LEDs
11 Daylightsensor
12 Connection-LED
13 Triangular nut
14 Wing screw
15 Bracket
16 Mains adapter
17 Plugs
18 Screws

5. Technical data

Operating Voltage
Current consumption
Ratio-frequency
Modulation
Channels
Radio range (max.)
Picture
Light sensitivity
Infrared filter
Illumination
5 V DC (mains adapter)
650 mA
2400 -2483 MHz
GFSK
4
100 - 200 m (open space)
colour (b/w with IR)
1-8 Lux (w/o IR-LEDs)
changes automatically
30 Infrared LEDs
GB - 13