Getting Started; Connections - Sony Trinitron KV-J25 Mode D'emploi

Getting Started

Connections

Connecting the 3D WOOFER
p KV-J29MH21 only
1
Attach the 3D WOOFER into the footholds on the top of the TV.
2
Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of the TV.
The red wire should be connected to the ' red terminal and the black wire to the ' black terminal.
1
Notes
• Connect only the supplied 3D WOOFER; otherwise the TV may malfunction.
• Unplug the TV from the wall outlet when connecting the 3D WOOFER.
• Make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring speaker terminal, to prevent a
malfunction caused by a short circuit of the terminals.
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable.
Plug the connector into the
Rear of TV
6
-EN Getting Started
3D WOOFER
2
Black wire
Red wire
(antenna) socket at the rear of the TV.
or
Rear of TV
On a wall