terrapin X Guide Utilisateur page 25

Press and release (click) the push button to turn on the device.
X
The electronic aiming mark (1) appears.
Click the push button 3 times to enter the Bluetooth configuration menu.
X
The current Bluetooth setting is displayed (e.g. OFF).
Perform single clicks to select the desired Bluetooth setting (e.g. APP).
X
Click the push button 3 times again to confirm the displayed setting.
X
Four dashes appear and indicate that the setting has been stored.
Set up a Bluetooth connection with a counter device
Store the, for the counter device, appropriate Bluetooth setting (see above).
X
Press and release (click) the push button to turn on the device.
X
The Bluetooth symbol is flashing fast.
Start the pairing procedure on the counter device (e.g. Smartphone or Kestrel
X
Weather Meter).
Select the TERRAPIN X from the list on the counter device.
X
The pairing process starts automatically. A steady displayed Bluetooth symbol is indi-
cating a successful Bluetooth connection. Without any further interaction, the display
goes off and the device goes in sleep mode after a while.
A fast flashing Bluetooth symbol is indicating a Bluetooth connection
error.
25