Boiling Eggs To Different Hardnesses - SilverCrest SEKE 450 A1 Mode D'emploi

Boiling eggs to different hardnesses
You can boil eggs to two different degrees of firmness in the appliance. It will always
reach the softest level first. For reliable results, all the eggs used must be of the same
size and have the same starting temperature.
For the first cooking process, the symbols
For the second cooking process, the symbols
Prepare the appliance as described in the section Preparations.
Turn the control switch
level of the eggs (the symbols to the right of the control apply):
Press the operating switch
up and cooking begins.
As soon as the eggs have reached the first, softer hardness level, a beep will be
heard. Then press the operating switch
control lamp
Take off the lid
the softer degree of hardness).
Replace the lid
left of the control (the desired hardness level for the eggs that remain in the appliance):
SEKE 450 A1
to the position that corresponds to the softest hardness
to turn the appliance on. The control lamp
goes out.
and carefully remove the desired number of eggs (now boiled to
and turn the control switch
to the right of the control apply.
to the left of the control apply.
again to switch the appliance off. The
to the position of the symbol to the
GB │ IE
lights
│ 13 ■