Setting Up - SilverCrest SEKE 450 A1 Mode D'emploi

CAUTION! PROPERTY DAMAGE!
Do not use an external timer switch or a separate remote control
►
system to operate the appliance.
Never leave the appliance unattended during operation.
►
Use only the supplied accessories.
►
Never use the appliance without the cooking insert and water in
►
the cooking bowl.
Do not use abrasive or caustic cleaning agents. These could
►
damage the outer surfaces of the appliance.
NOTE
No user action is required to switch the product between 50 and
►
60 Hz. The product adapts automatically to either 50 or 60 Hz.

Setting up

Clean all parts of the appliance as described in the section Cleaning.
Unwind the mains cable completely from around the cable retainer
through the notch on the rim.
Insert the plug into a suitable mains power socket.
The appliance is now ready for use.
SEKE 450 A1
and guide it
GB │ IE │ 9 ■