emerio AF-125830.4 Mode D'emploi page 7

Menu setting in default (You may make adjustment according to the individual taste.)
Food
Working
temperature (℃)
Working time
(minutes)
BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug this appliance into an
earthed socket. Before first use, remove the packing materials. Clean the basket and frying grill. (See
"CLEANING AND MAINTENANCE") Wipe inside and outside of the appliance with a soft cloth. Make sure that
the electrical parts remain dry. This appliance heats food at all directions and most of the ingredients do not
need any oil.
Operate the appliance before first use for approximately 3-5 minutes in order to burn off production residues.
Make sure there is good ventilation. The appliance may emit some smoke and a characteristic smell when you
switch it on for the first time. This is normal and will stop soon.
Note: Always use the frying grill with the silicone cases attached. They will help to stabilize the frying grill in
the basket during cooking.
USE
1. Place the appliance on a dry, stable, and heat-resistant surface.
2. Since the appliance becomes hot during use, make sure that it is not too close to other objects.
3. Pull out the basket from the appliance by the basket handle. Put the frying grill into the basket.
4. Place the ingredients into the basket. Slide the basket into the appliance. Make sure they are placed
correctly and closed completely. Otherwise the appliance will not work. Caution: Do not touch the basket
during use or after use in short time as it gets very hot. Only hold the basket by the handle.
5. Connect the power plug to a suitable outlet. The machine is now standby.
6. Press the start/stop button once. The control panel is awakened. Press the temperature adjustment
button " " "
" " " "to set desired time (1 - 60 minutes). You can also long press the adjustment button for rapid
adjustment.
7. You can also press the menu selection button to directly choose the cooking function in the menu. When
it goes through to the last food icon, pressing the menu selection button again will make the appliance
exit the menu selection. If you wish to adjust the time and temperature a little, please make adjustment
as step 6. The selected food icon in the menu will flash.
8. Press the start/stop button again; the appliance starts working. When the appliance is working, the
indicator light turns on with the outer circle flashing. The centre red light will turn on and off
automatically, which shows that the heating components are turning on and off automatically to maintain
the set temperature. The cooking temperature and remaining time will be displayed repeatedly until the
set time has passed.
9. When the cooking process is finished, the blower will work for a few seconds, and then the appliance will
enter standby. You can also manually stop the appliance by pressing the start/stop button. The appliance
will also have its blower working for a few seconds before it enters standby.
10. Pull out the basket from the appliance by the basket handle. Check if the ingredients are ready. If not,
simply slide the basket back into the appliance. Set the temperature and the timer to a few extra minutes.
Then press the start/stop button to run the machine again. NOTE: You can also pull out the basket to
check and shake the ingredients during cooking process. When you slide back the basket, the machine will
continue to work with the selected setting.
11. Empty the basket, putting the food into a bowl or onto a plate. To remove large or fragile ingredients, lift
the ingredients out of the basket by a pair of tongs.
To remove ingredients (e.g. beef, chicken, meat, any ingredients with original oil and will have excess oil
from ingredients collected on the bottom of the basket), please use tongs to pick ingredients one by one.
Pizza Chips Shrimps
200 200 180
8 22 12
" to set your desired temperature (80℃ to 200℃). Press the timer adjustment button
Fish Drumsticks
180 180
14 21
- 6 -
Ribs Vegetable
180 180
20 15