EN
Cleaning and Storage
■
■
■
■
1. Take the roller (9) out of the device (see the "Changing the
2. Hold the head of the device under running water for 5 to 8
3. Allow the device to dry thoroughly and allow the roller (9) to
4. Insert the roller (9) back into the device and put on the
5. Store the device and accessories in a dry place which is
01306_DE-EN-FR-NL_A6_V1.indb 28
01306_DE-EN-FR-NL_A6_V1.indb 28
CAUTION!
Make sure that the device is switched off before cleaning it!
The device may be rinsed under running water, but
must not be fully immersed under water! It could be
damaged!
Only use water to clean the rollers.
Do not use any corrosive or abrasive cleaning agents to
clean the device. These can damage the surface.
Roller" chapter) and brush off any fl akes of skin.
seconds. Also clean the roller (9) under running water.
dry completely in the air.
protective cap (1).
not accessible to children and animals.
28
02.11.2017 10:39:06
02.11.2017 10:39:06