Safety Instructions - IKA Vortex 1 Mode D'emploi

Masquer les pouces Voir aussi pour Vortex 1:
Table des Matières

Publicité

EN
Contents

Safety instructions

Correct use
Unpacking
Commissioning
Maintenance and cleaning
Warranty
Technical data
Safety instructions
Read the operation instructions in full before starting
up and follow the safety instructins.
Keep the operating instructions in a place where they can be
accessed by everyone.
The appliance complies with international laboratory instru-
ment safety regulations.
Caution: overfilling with liquid may cause the medium to
splash out.
For this reason, only closed test tubes should be used.
Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
Set up the appliance in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface.
Wear your personal protective equipment in accordance with
the hazard category of the medium to be processed.
Otherwise there is a risk of:
- splashing liquids,
Page
- projectile parts,
- body parts, hair, clothing and jewellery getting caught.
7
Beware of the risk of:
8
- flammable materials.
8
- glass breakage as a result of mechanical shaking power.
8
8
Only process media that will not react dangerously to the
9
extra energy produced through processing. This also applies
9
to any extra energy produced in other ways, e.g. through
light irradiation.
The appliance is maintenance-free and must not be opened.
Do not operate the appliance in explosive atmospheres, with
hazardous substances or under water.
The feet of the appliance must be clean and undamaged.
Sharp edged vessels cause wear debris on the attachments.
This can lead to the destruction of the attachments and the
appliance.
7

Publicité

Table des Matières
loading

Table des Matières