Desoutter EAB15-900 Mode D'emploi page 22

6159930390_05
Original instructions.
© COPYRIGHT 2014, DESOUTTER HP2
7SJ UK
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is designed for installing and
removing threaded fasteners in wood, metal and
plastic.
No other use permitted.
For professional use only.
DECLARATION OF NOISE AND
VIBRATION EMISSION
● See page 105.
All values are current as of the date of this
publication. For the latest information please visit
desouttertools.com.
These declared values were obtained by
laboratory type testing in accordance with the
stated standards and are suitable for comparison
with the declared values of other tools tested
in accordance with the same standards. These
declared values are not adequate for use in risk
assessments and values measured in individual
work places may be higher. The actual exposure
values and risk of harm experienced by an
individual user are unique and depend upon
the way the user works, the workpiece and the
workstation design, as well upon the exposure
time and the physical condition of the user.
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_
sheet_0111.pdf
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so that
management procedures can be modified to help
prevent future impairment.
ADVICE FOR YOUR SAFETY
● Please pay attention to the safety instructions
in the attached leaflet!
● Do not dispose of used battery packs in the
household refuse.
● Do not store the battery pack together with
metal objects (risk for short circuit).
● No metal part is to enter the battery section of
the charger (risk for short circuit).
● Never break battery packs and chargers open.
Only store them in dry rooms. Keep dry at all
times.
● Do not let any metal part reach the airing slots
(risk for short circuit).
BATTERY STICKER
Do not heat up or burn.
Use only Desoutter recommended
chargers for charging Desoutter battery
packs.
Do not use battery packs from other
systems.
Only charge with original charger.
Do not charge if damaged.
Do not dip into liquid.
Could gas or explode.
TECHNICAL DATA
● See page 3.
- Working temperature : 0 / +40°C.
- Humidity ratio : 0 / 90%.
22 / 108 22 / 108
English
04/2014 04/2014