Before Use; Alarm Settings - AudioSonic RD-1541 Mode D'emploi

befOre use

• T ake the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Connect the power cable to the socket.
Note: Make sure the voltage which is indicated on the device matches
the local voltage before connecting the device. Voltage: 220-240V~ 50Hz.
use
• Turn the volume control on/off switch (4) and adjust the volume.
• Slide the AM/FM/AUX switch (3) to the desired band (AM /FM).
• Search for the preferred station by turning the tuner (2).
• Slide the volume switch (4) to off position after you finished listening.
comments:
• M W-band uses an internal directional antenna. Turn the radio in the right direction
for a good reception.
• Make sure the FM-antenne (13) is fully extended for a good FM-reception.
Time seTTings
By using the time setting button (11) you can adjust the current time.

alarm seTTings

• B y turning the alarm setting button (9) you can adjust the desired wake up time.
• S et the alarm on/off button (10) "on".
• W hen the alarm sounds, turn off the alarm by switching the on / off button (10)
to the "off" position.
lighT
Press the light key (8) for turning on the backlight of the analog clock.
auX-in
• T o connect an external device on the radio, you can use the aux-in jack (12).
• P ut the Aux-in plug (not included) in the designated Aux-in jack (12).
• T urn on the external device and adjust the volume with the volume knob (4).
headphOne
For listening by an headphone you can plug the headphone in the appropriate
headphone jack (7).
specificaTiOns
Model no.: RD-1541
FM-frequency: 87.5 – 108 MHz
AM-frequency: 540 – 1600 KHz
Power consumption: 7 W
AC supply: 230V~ 50Hz
GB
Instruction manual
7