Tetra Tetronic LED Connect Complete Set 580 Mode D'emploi page 13

5. Select your home Wi-Fi network and enter the appropriate
Wi-Fi password.
Notes: The LED luminaire can only be integrated in a Wi-Fi
network in the 2.4 GHz frequency band and not the 5 GHz
frequency band. Where necessary, configure your Wi-Fi
router accordingly.
6. Select a time zone.
7. Only necessary for iOS: Switch to smartphone settings and
select the following Wi-Fi network:
– "SPB_Light ..."
– Wi-Fi password "FishAreFun"
For information: This is the ad hoc Wi-Fi network for the LED
luminaire, which is only required for iOS and only for pairing.
Once pairing is successfully completed, the app automatically
switches to your home Wi-Fi network.
Ensure that GPS is enabled on your smartphone.
8. Add a new device in the app:
– Click on the Devices + symbol.
– Select the new device "Tetra Tetronic LED ..."
– Click on "add".
The device is then configured. This may take some time.
You can now begin programming your device.
App screens
The app is constantly being developed. Therefore the screens on
your device may look different to those shown below.
Your smartphone or tablet's language settings are automatically
applied to the user interface. It defaults to English if no language
is set.
1
2
Standard screen functions
2
(1): Go back to the previous screen.
(2): Open menu (3D aquariums,
TLL0013
contact, retailer search, etc.).
"My Aquarium" main screen
This screen appears when you
select "My Aquarium". It shows all
the aquariums that you have added.
1
(1): Add a new aquarium.
3 (2): Aquarium name
(3): Edit aquarium name.
4
(4): Wi-Fi icon – switches to the
aquarium screen.
UK
13