Installation Instructions - Dion F61 Instructions D'installation

Instructions d'installation/ Installation instructions : F6113T941
Ensemble Adaptateur F61 / Adapter Kit F61 : JF K26952
Note: The adaptor kit K26952 does NOT require the header gearboxes to be inverted as
previous model K26063.
Step 1: Reception

See the operator's manual for instructions on receiving and removing the skid from the
header. Important : Remove the temporary lifting arm before operating the header.
Step 2 : Preparation

Open the left side guards as shown.

Remove the chain binder bracket (1) and disassemble the spring (2) by removing the
two lock nuts.
Step 3: Left module installation

Install the support (3) with flange bolts 1/2'' x 1-1/4'' (4) and nuts ½'' (5). Do not tighten
immediately.
18 février 2013

Installation instructions