Continuous Drainage - Air Naturel air&me Orain Notice D'utilisation

OPERATING INSTRUCTIONS
Make sure that the product is placed on a dry, flat and horizontal surface. Leave at least
30 cm of space on the back and sides of the product, and at least 50 cm of space above the
product. Be aware that the pre-filter and the tank are properly placed.
1. Insert the plug into a mains socket.
2. Press the power button on the back on the product to start the machine. The indicator turn
in green light.
3. The product runs automatically at speed 1.
4. Press a second time to activate the speed 2.
5. Press the power button again to turn off.
FUNCTION INSTRUCTION
WATER TANK DETECTION
The dehumidifier will stop running when the
water tank is pulled out, and the indicator
will turn yellow. When the water tank is reset,
the dehumidifier will run again, the indicator
will turn green.
WATER FULL
When the tank is full, the indicator will turn
yellow and the dehumidifier stops running.
The dehumidifier will run again after filling
the tank and resetting.
Emplty the tank :
1. Pull the tank with the handle.
2. Empty the tank through the hole provided
for this purpose.
3. Replace the tank and press the power
button.
The light indicator is around the power button:
- the light is green : the product runs normaly.
- the light is yellow : the tank is full or poorly engaged.

CONTINUOUS DRAINAGE

Take out the rubber plug of the continuous
drain outlet place on the back of the
water tank, and plug the drainage hose
(diameter: 8mm). Put the end of the hose
in a floor sewage disposal. The product will
run automatically in continuous drainage. Be
aware that the hose is not fold and the water
could flowing easily with gravity
9