Overview Of Programming Facilities - ROBBE ROXXY BL-CONTROL 900 OPTO Série Notice D'utilisation

5. Using the Programmer to change settings
Use the robbe Programme No.8642 will enable the easy and effi-
cient programming of the controller to suit the model specific re-
quirements.
This clear, user-friendly unit allows quick and secure programming
to be made via the unit's LCD.
5.1 Connecting the Programmer
Programmer
Drive battery
Helicopter
Select Battery
Cut Off Voltage
Cut Off Type
Motor Direction
Advance Timing
Acceleration
Start Power
Response of Governor
Governor On / Off
Motor Pole Num
Gear Ratio
Max. RPM
Average RPM
Down Load
Restore Mem.
Backup Mem.
Operating Instructions
Roxxy BL-Control 900 series Opto
motor connection
Motor controller
Boat / Car
Select Battery
Cut Off Voltage
Cut Off Type
Motor Direction
Advance Timing
Acceleration
Start Power
Reverse Function
Motor pole Num
Gear Ratio
Max. RPM
Average RPM
Down Load
Restore Mem.
Backup Mem.
5.2 Navigating using the Programmer
The operation of the Programmer is extremely simple. Using the
outer arrow buttons cursor up or down to arrive at your choice of
programming mode.
Furthermore, one can change the model type when depressing both
arrow buttons. The middle buttons DEC (-) and INC (+) serves to
choose and alter the settings.

5.3 Overview of programming facilities

With the exception of a few minor differences between the three
modes, all program modes are similarly arranged in a menu format;
these are listed in the table below:
11
Aircraft
Select Battery
Cut Off Voltage
Cut Off Type
Motor Direction
Advance Timing
Acceleration
Start Power
Air Brake Type
Airbrake On/Off
Motor pole Num
Gear Ratio
Max. RPM
Average RPM
Down Load
Restore Mem.
Backup Mem.