1
MOUNTING LOCATION
Plan the layout of the fixtures and ensure power
wiring is routed to all installation locations.
A 4" outlet box or 5" or 6" recessed housing with
clip retainers must be installed at each light location
before installing the fixture. Remove the bulb from
the recessed housing socket prior to installation.
Outlet Box
• 4" square or octagon
• At least 1" deep
• Before installation, make sure the fixture
power supply fits in the outlet box.
Recessed Housing
• 5" or 6" diameter
• Remove bulb from socket prior
to fixture installation
HAIKU® HOME
WWW.HAIKUHOME.COM/SERVICE
●
1-855-MY-HAIKU
●
2
DISCONNECT POWER
or
Circuit breakers
Disconnect power to the installation
location at the fuse or circuit breaker
before installing the fixture!
Fuse panel
3