If your recessed housing does not have retainers, contact Customer Service for a retainer kit.
1
Squeeze the torsion springs and insert them into the retainers on the housing.
2
While supporting the fixture, connect the wires from the socket adapter to the wire connectors on the
fixture. Lift the levers on the connectors. Push the socket adapter Hot wire into the fixture Hot (black)
connector and the socket adapter Neutral wire into the fixture Neutral (white) connector [A]. Close the
levers and visually verify the connections.
Raise the fixture to the mounting plate and twist clockwise to lock it into place.
North America
100–120 V
Australia
240 V
All other regions
HAIKU® HOME
WWW.HAIKUHOME.COM/SERVICE
●
AC Hot
AC Neutral
Black
Black
Brown or Red
Black or Light Blue
Brown
1-855-MY-HAIKU
●
White
White
Blue
INSTALLATION COMPLETED
11