Haiku AC Neutral Guide D'installation page 3

READ AND SAVE THESE INSTRUCTIONS
WARNING: A licensed electrician must install the fixture if required by your local electrical code. All
!
wiring must be in accordance with the National Electrical Code and local electrical codes.
WARNING: Risk of fire or electric shock. Installation of this retrofit assembly requires a person familiar
!
with the construction and operation of the luminaire's electrical system and the hazard involved. If
not qualified, do not attempt installation. Contact a qualified person.
WARNING: Risk of fire or electric shock. Install this kit only in luminaires that have the construction
!
features and dimensions illustrated in these instructions and where the input rating of the retrofit kit
does not exceed the input rating of the luminaire.
WARNING: To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or
!
other sharp objects.
CAUTION: Do not install the fixture in a location where it may come into direct contact with water.
!
Installation requires basic electrical knowledge. Contact a licensed electrician if you are uncomfortable
!
performing electrical work or if legally required in your area.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
!
installation.
This retrofit kit is accepted as a component of a luminaire where the suitability of the combination
!
shall be determined by authorities having jurisdiction.
Examine and replace all damaged parts prior to installation of retrofit kit.
!
Do not use the light with a dimmer switch.
!
Models: 10R-01-01-A0-A-01-1.2-01-XXXX-HKL, 10R-01-01-A0-F-02-1.2-01-XXXX-HKL