Nexo NXAMP4x1mk2 Guide De Démarrage Rapide page 5

Masquer les pouces Voir aussi pour NXAMP4x1mk2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
• Keep the device out of reach of children, to keep them from
putting their fingers into openings on the equipment and acci-
dentally being injured.
Connections
• Before connecting the device to other devices, turn off the
power for all devices. Before turning the power on or off for all
devices, set all volume levels to minimum.
• Use only speaker cables for connecting speakers to the
speaker jacks. Use of other types of cables may result in fire.
• XLR-type connectors are wired as follows (IEC60268 stan-
dard): pin 1: ground, pin 2: hot (+) and pin 3: cold (-).
• Use only speakON NL4 plugs for connecting SP connectors.
Maintenance
• Inspect the ventilation holes and clean them periodically. Dust
and dirt can seriously degrade the effectiveness of the cool-
ing and result in malfunction or fire.
• Remove the power plug from the AC outlet when cleaning the
device.
• The performance of components with moving contacts, such
as switches, volume controls, and connectors, deteriorates
over time. Consult qualified NEXO-SA service personnel
about replacing defective components.
• Do not use aerosols or spray-type chemicals that contain
combustible gas for cleaning or lubrication. The combustible
gas will remain inside the unit, which may cause explosion
or fire.
Handling caution
• When turning on the AC power in your audio system, always
turn on the device LAST, to avoid speaker damage. When
turning the power off, the device should be turned off FIRST
for the same reason.
• Do not insert your fingers or hands in any gaps or openings
on the device (vents...)
• Avoid inserting or dropping foreign objects (paper, plastic,
metal, etc.) into any gaps or openings on the device (vents,
etc.) If this happens, turn off the power immediately and un-
plug the power cord from the AC outlet. Then have the device
inspected by qualified NEXO-SA service personnel.
• Do not use the device for a long period of time at a high or
uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in
the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects
on it, and avoid use excessive force on the buttons, switches
or connectors.
• Do not use this device for any purpose other than driving loud-
speakers.
• Rapidly turning the unit on and off in succession can cause it
to malfunction. After turning the unit off, wait for more than five
seconds before turning it on again.
WARNING! This
electrically live terminal. When connecting external wires
to these terminals, it should be made by a person who has
relevant education or experience how to make the connec-
tion in a safe way.
Information
European models
Purchaser/User Information specified in EN55103-2: 2009.
Conforms to Environments: E2, E3 and E4
The model number, serial number, power requirements,
etc., may be found on or near the name plate, which is at
the top of the unit. You should note this serial number in
the space provided below and retain this manual as a per-
manent record of your purchase to aid identification in the
event of theft.
Model No.
Serial No.
– 5 –
mark indicates a dangerous
(top_en_01)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nxamp4x2mk2Nxamp4x4mk2

Table des Matières