Blower Operation - Hart VP205-C-3701 Manuel D'utilisation

OPERATION
FIG. 19
FIG. 20
FIG. 21
FIG. 22
FIG. 23

BLOWER OPERATION

See Figures 24-29.
This wet/dry vacuum has blowing capabilities.
To use the blower feature follow the instructions
listed.
WARNING:
Always wear safety goggles complying with ANSI Z87 .1
(or in Canada, CSAZ94.3) before using blower.
WARNING:
Keep bystanders clear from blowing debris.
WARNING:
Wear a dust mask if blowing creates dust that might
be inhaled.
• Verify that the power cord is disconnected from
the outlet.
• Make sure the collection tank is empty before
using as a blower. Clear all dirt and debris from
the hose and collection tank.
• Remove the hose from the vacuum port.
• Insert the locking end of the hose into the blower
port on the back side of the power head and
lock into position.
• Push the required attachment onto the free end
of the hose or extension wand.
• Verify that the power switch is in the 'O' OFF
position before plugging the power cord into
the outlet. Plug the power cord into the outlet.
• Before turning on the vacuum, firmly hold the
loose end of the hose. Turn the motor on by
flipping the switch to the 'I' ON position.
• Once you have completed blowing, flip the
power switch to the 'O' OFF position and unplug
the power cord from the outlet.
FIG. 24
9 English