Hart VP205-C-3701 Manuel D'utilisation page 13

MAINTENANCE
INSTALLING FOAM WET FILTER
See Figures 39-41.
• Verify that the power cord is disconnected from
the outlet.
• Remove the power head and place in an upside-
down position. Follow instructions to remove the
reusable cloth filter on page 12.
• Carefully slide the foam wet filter down over the
filter cage making sure the cage is completely
covered.
• Place the power head onto the collection tank.
FIG. 39
FIG. 40
FIG. 41
CLEANING FOAM WET FILTER
See Figures 42-43.
• With the removed power head in an upside-down
position, carefully remove the foam wet filter.
• Use a mild soap and water solution to wash the
foam wet filter and rinse with clean water.
• Allow the wet filter to air dry for 24 hours before
installing onto the filter cage.
FIG. 42
FIG. 43
13 English