tbs electronics PSC1600-12-60 Mode D'emploi page 13

Factory setting = OFF
Factory setting = ON
1)
Invalid battery type settings can cause serious damage to your batteries and/or connected
battery loads. Always consult your battery's documentation for the correct charge voltage
settings.
Models : PSC2000-3500 only
Reserved
Models : PSC2000-3500 only
Bypass remote switch (Bypasses the remote switch
connection when no remote switch is connected)
ON : Remote switch connection terminals are bypassed
OFF : remote switch connection terminals are open. A
remote switch must be connected and switched ON
in order to activate the Powersine Combi. The local
on/off switch on the frontpanel always overrides the
remote switch. So in order to use the remote switch,
the local on/off switch must be in the 'on' or
'charger only' position.
!
CAUTION
12