Inserting A Minidisc - Sharp MD-MT90H Mode D'emploi

Inserting a MiniDisc

4
Recordable
Recording
prevented
2
1
3
When you record on a MiniDisc,
check that the erase prevention
tab is set to the "Recordable"
position.
1
Slide the OPEN lever to release the compart-
ment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
z Do not place the MiniDisc under the holder.
z If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resis-
tance is felt, remove the MiniDisc and reload it.
z The lid cannot be opened if "TOC" is displayed refer to
the instruction on page 10.
ENGLISH
E-6