SilverCrest SGM 110 A1 Mode D'emploi page 36

■ Use a damp cloth to wipe the inside and outside of the motor unit
filler opening cap
soiling use a mild detergent on the cloth. For inaccessible corners use the
supplied cleaning brush
moistened with clean water.
■ To clean the motor unit
–
Turn the lower section (metal) of the motor unit
on the motor unit
unit
–
Rinse the lower section (metal) of the motor unit
taining a mild detergent. Rinse with clear water and dry thoroughly.
SGM 110 A1
, the housing lid
. Wipe off any detergent residues using a cloth
thoroughly, take it apart (Fig. 5):
- marking on the lower section (metal) is aligned with the - marking
. Remove the lower section (metal) from the motor
.
and the housing . For stubborn
clockwise so that the
in warm water con-
GB│IE
, the
33 ■
│