Built-In Battery Monitoring; Battery Recharging - RIKTA ESMIL Mode D'emploi

40

BUILT-IN BATTERY MONITORING

After the Device is switched on and during Device operation, battery
charge is checked automatically.
The battery charge indicator "Battery" [6] shows battery charging status.
The indicator
does not light
The indicator
blinks red
In case of low battery the Device will be turned off.

BATTERY RECHARGING

Connect the charger [K3] to the socket [9]
EN
The battery charge indicator [6] lights red during charging process.
Operating the device while charging the battery is not possible!
After the charging process is complete, the indicator [6] lights up green.
Unplug the charger from the wall outlet and charger cable from the socket
of the Device [9].
The battery voltage is normal
Battery will last for approximately 10 minutes only.
It should be recharged.
Operating manual
Plug the
charger/
adaptor
into a wall
outlet