Changing The Device Name - Sony PCGA-BM1 Mode D'emploi

12
Turn off the power of the PCGA-BM1 and set the DIP switch
1 (setup/normal operation mode selector) on the bottom
panel of the unit to OFF and the DIP switch 3 (private ON/
OFF selector) to ON.
The deletion becomes valid when you turn on the power of the PCGA-BM1
again.

Changing the device name

The device name of the PCGA-BM1 can be changed to any alphanumeric
string using the supplied modem station utility. The device name is shown
on the notebook when performing Bluetooth bonding.
Note
If the modem station utility is not installed, it must first be installed as described on page
25.
1
Set the DIP switch 1 (setup/normal operation mode selector)
on the bottom panel of the unit to ON and the DIP switch 3
(private ON/OFF selector) to OFF.
For details, refer to "DIP Switch Settings" on page 17.
2
Turn on the power of the PCGA-BM1.
3
Activate Bluetooth communication on the notebook and
establish a link to the PCGA-BM1.
For details, refer to the manuals provided with your Sony notebook.
4
Click the "Start" button and go to "Programs", then "Modem
Station Utility", and click "Modem Station Utility".
The "Destination" dialog box appears.
GB
28