Installing The Country Selector; Selecting The Country Code - Sony PCGA-BM1 Mode D'emploi

Installing the Country Selector

Use the Country Selector application to select the country where the
PCGA-BM1 is used. Install the Country Selector from the supplied
CD-ROM.
1
Insert the utility CD-ROM into the notebook's CD-ROM drive
or other drive capable of reading CD-ROMs, such as a DVD
drive.
2
Double-click the "My Computer" icon and then click the
CD-ROM drive icon.
3
Double-click the "MsCtySlt" folder.
4
Double-click "Setup.exe".
The installation program for the modem station Country Selector starts.
Install the program by following the prompts that appear on the
display.

Selecting the Country Code

"United Kingdom" is the default country code of the PCGA-BM1. When
using the PCGA-BM1 in any other country, you must make the appropriate
country code settings in the Country Selector application.
Perform the following steps.
1
If the power of the PCGA-BM1 is on, turn it off.
2
Set the DIP switch 1 (setup/normal operation mode selector)
on the bottom of the PCGA-BM1 to OFF, and then turn the
PCGA-BM1 on.
For information on the DIP switches, see the section "DIP Switch
Settings" (page 17).
3
Activate Bluetooth communication on the notebook and
establish a link to the PCGA-BM1.
For details, refer to the manuals provided with your Sony notebook.
GB
20