Examples Of Possible Uses; Start Guide - Num'axes CAM1014 Guide D'utilisation

Examples of possible uses

Start guide

1. Plug the Micro SD card.
Warning: please choose a class 10 Micro SD card. Before 1rst use, formatted
it on a computer.
2. Install and take out the battery.
Open the bottom door and insert the battery. Check carefully the polarity
(plus/minus poles) when inserting the battery.
3. Charge the battery.
Charge the battery by using the supplied USB cable to connect the video
camera to your computer USB port. You can also use the wall charger
(supplied too). You can charge up the camera battery and record video at the
same time. Charging up the battery is available when camera is power off.
P a g e 18 | 54