3.2.2 Standard programme P2
The desired temperature runs as shown in the following table.
This programme cannot be changed. In the programmes use is
made of 6 temperature levels, i.e. ECO-TEMP, TEMP-1, TEMP-2,
TEMP-3, TEMP-4, TEMP-5. These all have pre-programmed tem-
perature values, which can be changed if desired (§ 4.2). In the
table the standard set temperatures are stated between brackets.
No.
Time
Mo
Tu
We
Th
Fr
Sa
•
•
•
•
•
1
07:00
•
2
08:00
•
•
•
•
•
3
08:30
•
4
10:00
•
•
•
•
•
•
5
16:00
•
•
•
•
•
•
6
18:00
•
•
•
•
•
•
7
23:00
Example: So on Sunday the following programme applies:
Time
Temperature
00:00 - 08:00
ECO-TEMP (15.0 °C)
00:00 - 10:00
TEMP-2 (19.0 °C)
10:00 - 16:00
TEMP-3 (19.4 °C)
16:00 - 18:00
TEMP-4 (20.0 °C)
18:00 - 23:00
TEMP-5 (20.4 °C)
23:00 - 24:00
ECO-TEMP (15.0 °C)
ENGLISH
(perm. set)
3.2.3 Adjustable programme
as you wish)
The desired temperature runs as you programme it yourself.
This also applies to the hot-water ECO function. For
programming, see 4.3 Programme your own clock
programme P1.
As standard (and after a reset) there is no programme
present!
Su
Temperature
TEMP-2 (19.0 °C)
3.2.4 Constant day temperature
•
TEMP-2 (19.0 °C)
The desired temperature is constantly on TEMP-5 (§ 4.1) and
ECO-TEMP (15.0 °C)
the hot-water ECO function (§ 5.4) is not active.
•
TEMP-3 (19.4 °C)
•
TEMP-4 (20.0 °C)
3.2.5 Night temperature
•
TEMP-5 (20.4°C)
(ECO-TEMP)
•
ECO-TEMP (15.0 °C)
The desired temperature is constantly on ECO-TEMP (§ 4.1)
and the hot-water ECO function (§ 5.4) is active.
3.2.6 Menu
The function MENU is described in chapter 4 and 5. In this
position the desired temperature level is set to ECO-TEMP.
Do not forget to reset the rotary knob to the desired pro-
gramme after programming.
26
(programmable
(TEMP-5)