THOMSON DS120DABCD Mode D'emploi page 21

Manual Scan
1. Press the [SOURCE] key on main unit to select "DAB MODE".
2. Press the [ ] or [
the service menu.
3. Press [ ] or [
strength.
4. Press [MENU] or [
5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
DRC(Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds
easier to hear in a noisy environment.
1. In DAB mode, press the [
display "*" to the top right.
2. Press MENU to confirm the setting. The display will return to normal.
DRC OFF - DRC is switched off, broadcast DRC will be ignored.
DRC LOW - DRC level is set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press [
select the Prune option.
System (DAB)
In DAB mode, press
to the system setting submenu.
1. Language
Press [ENTER] to go to language selection; the default source language is English, the
selected language will have "*" displayed at the top right.
Users may choose between "Deutsch", "Italiano" and "Français".
2. Factory Reset
Press [ENTER] to go to factory reset. If you wish to perform the reset operation, push the
or until "YES" is highlighted on the display and press. A full reset of your radio will be
performed. All presets and station lists will be erased.
] button to select "Manual tune", press the [ENTER] button to enter
] to tune in the desired
] to exit scan.
] or [ ] button to select "DRC", press the [ENTER] button to
] or [ ] to display the "Prune" submenu, press ENTER button to
or to show the "SYSTEM" submenu, press the ENTER button to go
- EN 7 -
channel. The graph will indicate the signal