Sony TSL-A300C Mode D'emploi page 9

f Cartridge Indicator
This indicator appears when a cartridge is loaded in the internal AIT
drive, and indicates the tape's load status: when the tape is being loaded
or unloaded from the drive, this indicator blinks.
6
TAPE Indicator
Lights green when a data cartridge is loaded into the AIT-drive. The
indicator flashes while a cartridge is being loaded or unloaded.
7
BUSY Indicator
Lights green when the SCSI interface is ready for data transfer. This
indicator flashes while data is being read from or written to the cartridge
loaded into the AIT drive, while searching for data, or while the tape is
being rewound.
Chapter 1 Introduction
9