Option Switches (Dip Switch) - Sony TSL-A300C Mode D'emploi

Option Switches (DIP Switch)

DIP Switch Positions
Data Compression Control DIP switch
24
Chapter 2 Operation
ON
1 2 3 4 5 6
Note:
The TSL-A310C is not equipped with internal termination. When using this
unit, connect a differential SCSI bus terminator or a device with internal
termination to the end of the SCSI bus.
The TSL-A300C is equipped with internal termination.
Data compression can be selected by DIP switches. Data compression is
enabled while position 7 [DC Control (1)] is ON. Control by host can be
disabled when position 8 [DC Control (2)] is ON.
1 Reserved (OFF)
2 Reserved (OFF)
3 Reserved (OFF)
4 Reserved (OFF)
5 Terminator Power (ON)
6 Terminator Enable (No connection for TSL-A310C)
7 8
7 DC Control (1) (ON)
8 DC Control (2) (OFF)
DIP Switch