DRAMINSKI EDc Mode D'emploi page 13

1. Before beginning the measurement always make
sure that the electrodes are clean and degreased.
2. While using the ELECTRONIC ESTROUS DETECTOR
you should not use any lubricants, as they will
reduce the electrodes' contact with mucus, which
will distort the results
3. Check the detector's operation to make sure that
the battery has adequate power.
4 prepare a disinfectant in accordance with the
disinfectant manufacturer's
order to sterilize the probe (more details in the
chapter dIsInfectIon)
5. If the vulval area is dirty, clean it or wipe off with
a disposable towel.
12
6 all first time users of the electronIc estrous
DETECTOR are advised to take several or
a dozen measurements in female animals that are
undoubtedly in their estrous period, in order to
master the measuring technique.
instructions in