Overall Description - IARP B-ICE N Instructions D'emploi Et D'entretien

OVERALL DESCRIPTION

WARNING! Use protective gloves during unpacking
and installation operations.
INSTALLATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft cloth; for the glass parts only use
specific products, avoiding the use of water which can
leave on the glasses limestone residues.
• Keep a distance from the wall of 10 cm at least.
• Cabinet must be installed far away from any heat
source (radiators, stoves, etc) including sun rays.
Good running of the cabinet can be compromised
in cases where the airflow is disturbed (wind,
ventilators, air conditioning outlets, etc).
• Do not expose the cabinet to rain.
• It is necessary taht the condensing unit obtains
a good circulation of air around it.
• Also the area around the condensing unit should
not be obstructed by boxes or other objects
• Install and position the unit in such a way so as
to allow easy access to the power socket.
• Never use electrical equipment in the refrigerated
compartment
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
COMMAND PANEL
GLASS COVER
SPACERS
LATERAL GRID
REAR GRID
-16-