Zoning ZEBRA Manuel De L'utilisateur page 24

Selecting the weekly timeslots (menu No. 13, Fig. 13)
Menu No. 13 allows you to select the weekly programming
timeslots, with the following options:
• "05": the programming will be the same from Monday to
Friday and the weekend (Saturday and Sunday) will be
able to be programmed differently
• "06": the weekly programming will be the same from
Monday to Saturday and Sunday will be able to be
programmed differently
• "07": each day of the week can be programmed
separately
Do the following:
Fig. 13 Menu No. 13, weekly timeslot selection
Selecting the daily timeslots (menu No. 16, Fig. 14)
Menu No. 16 allows you to select the daily programming
timeslots, with the following options:
• "02": each day will have two different timeslots
• "04": each day will have four different timeslots
• "06": each day will have six different timeslots
Do the following:
1 When you are already in programming menu No. 1,
press "UP" 15 times, which will take you to menu No. 16
for setting the daily timeslots.
Fig. 14 Menu No. 13, daily timeslot selection
22
Manual del usuario
User Manual
1
ID ID
UP
x12
1
ID ID
UP
x15
1 When you are already in programming menu No. 1,
press "UP" 12 times, which will take you to menu No. 13
for setting the weekly timeslots.
2 Press "FAN" to enter this menu: the selection digit will
appear flashing; using the "UP" and "DOWN" buttons,
select the desired value (05: Monday to Friday +
Saturday and Sunday; 06: Monday to Saturday +
Sunday; 07: every day differently).
3 Press "FAN" to accept and you will access the following
menu (No. 14). If you want to continue with the
programming, move forward through the menus using
the "UP" and "DOWN" buttons and when you reach the
desired menu, press "FAN" to access that menu.
4 If you want to exit the programming, press "MODE".
2
FAN
UP
2 Press "FAN" to enter this menu: the selection digit will
appear flashing; using the "UP" and "DOWN" buttons,
select the desired value (02: two different timeslots; 04:
four timeslots; 06: six different timeslots).
3 Press "FAN" to accept and you will access the following
menu (No. 17). If you want to continue with the
programming, move forward through the menus using
the "UP" and "DOWN" buttons and when you reach the
desired menu, press "FAN" to access that menu.
4 If you want to exit the programming, press "MODE".
2
FAN
UP
V 12/17
3
FAN UP DOWN
4
ID ID
MODE
DOWN
3
FAN UP DOWN
4
ID ID
MODE
DOWN