Sony WEGA KP-FX432 Mode D'emploi page 47

Select
"Video Label"
"Color System"
"Eco Mode"
"S Input"
Notes
• If "Eco Mode" is on, the ECO MODE (
• "Game Mode" is available only when receiving signals through the t
• When high-definition (HD) signals or progressive signals are input, "Wide
To return to the normal screen
Press MENU.
To
assign labels to the connected audio/video equipment.
V i d e o L a b e l
V i d e o I n p u t : V i d e o 1
L a b e l : V i d e o 1
S e l e c t : C o n f i r m :
See "Assigning labels to the connected audio/video equipment"
on page 55.
select the color system. Normally, set this to "Auto".
You can select the color system for each channel or each video
input.
reduce power consumption of your projection TV to save energy.
Move up or down to select "On", then press
To cancel, select "Off", then press
select the S video input mode.
Move up or down to select "Auto" to receive the S video signal
automatically when the signals are input through both the
video input) and
channel, then press
To deactivate the S video input, select "Off", then press
right corner of the screen when you turn on the projection TV or when
you press on the remote.
(video input), (S video input), or
Mode" and "Game Mode" do not function.
E n d :
.
(video input) jacks of the same video input
.
) icon will appear at the bottom
(component video input) jacks.
Adjusting Your Setup (MENU)
.
(S
.
continued
47