DrBrowns Natural Flow Deluxe Mode D'emploi page 6

Masquer les pouces Voir aussi pour Natural Flow Deluxe:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TO CLEAN THE APPLIANCE:
The Dr. Brown's Natural Flow
a week when in regular use. Wait at least 60 minutes after a sterilization cycle to allow
the devise to cool. Before cleaning your device ALWAYS disconnect the power plug
from the outlet.
The removable divider, removable basket, tongs and measuring cup can be cleaned
in hot soapy water and rinsed completely.
The base exterior and heating chamber and two covers can be cleaned with a damp
sponge or damp cloth.
NOTE: DO NOT IMMERSE THE STERILIZER BASE IN WATER.
TO CLEAN THE HEATING ELEMENT:
Mineral deposits may form on the metal heating element beneath the grill in the
bottom of the heating chamber. It is important to de-scale this appliance every
4 weeks to ensure that it continues to work properly.
Unplug the device.
Remove the divider and basket.
De-scale utilizing a 2:1 ratio -- mix 1 oz of white vinegar with 2 oz of cold water and
pour directly over the heating element.
Turn the unit on and run until the mixture is evaporated and any scaling has
been removed.
NOTE: DO NOT USE HARSH ABRASIVES OR SOLVENTS TO CLEAN THE HEATING
CHAMBER OR HEATING ELEMENTS AS THEY MAY CAUSE PERMANENT DAMAGE.
PLEASE ENSURE PROPER VENTILATION WHEN DESCALING WITH VINEGAR.
RETURN POLICY
If your Dr. Brown's Natural Flow
contact Handi-Craft
®
Handi-Craft
Company
®
St. Louis, Missouri 63116 USA
www.handi-craft.com
Household use only. 1 Year Limited Warranty.
Made in China.
©2012 Handi-Craft Company
6
®
Deluxe Bottle Sterilizer should be cleaned at least once
Deluxe Bottle Sterilizer is not working, please
®
Customer Service Department at 1-800-778-9001.

Publicité

Table des Matières
loading

Produits Connexes pour DrBrowns Natural Flow Deluxe

Table des Matières