Conventional Weighing - DS Produkte Z 01541 Mode D'emploi

• Weigh yourself without any clothing and barefoot. To make it easier to com-
pare results, it is advisable to always weigh yourself at the same time (pref-
erably in the evening, before eating) and under the same circumstances.
• The measured values may be distorted if you measure yourself immediately
after doing sport or you have not eaten and/or drunk enough over the day.
• Stand on the contact areas during weighing. The scales can only work prop-
erly if you place yourself correctly on the contact areas.
• Measurement of the body fat and water content as well as muscle and bone
mass is only possible with bare feet. Give the contact areas a wipe if neces-
sary in order to improve the conductivity. The feet must be dry!
• The scales round up the weight to whole 100 g.
• The scales react to a minimum weight of 6 kg.

Conventional Weighing

1. Place the scales on a dry, even, and fi rm base (avoid carpets). Uneven fl oors will
result in inaccurate measurement results.
2. Tap your foot on the scales to activate the display.
3. Wait until the display shows '0.0' (kg / lb / st).
Before you stand on the scales, you can choose whether the weight should
be displayed in kilograms (kg), pounds (lb) or stone (st) (see the "Setting the
Weight Unit" section).
4. Stand on the scales. The body weight will be calculated.
5. Once the body weight has been established, the number on the display begins to
fl ash. You can now get off the scales.
6. The scales switch off automatically after a few moments.
Downloading App and Creating Account
Before the scales can calculate your body fat and water content and the content of bone
and muscle mass as well as your BMI and daily calorie demand, the following details
need to be saved in your user profi le: Gender, height, age. You have the option of saving
up to 8 user profi les in the app.
1. Download the app "AIFit" either using the QR code on the packaging or from the
Google Play Store (Android) or AppStore (iOS). The app requires iOS 8.0 or higher,
or Android 4.3 or higher.
2. Register with your e-mail address and a password.
Creating and Managing User Profi le
You can enter your own user profi le in the app directly after registering. Once you have
entered all the data, select DONE. You automatically move to the main
user profi les are entered using the plus button in your profi le:
1. To do this, select your profi le, either by selecting your profi le name at the top left or by
swiping to the right on the display. The profi le menu opens up.
2. Select the plus button. The profi le creation mask opens up again.
3. Enter the new profi le (name, gender, height, date of birth) and confi rm the details
entered with DONE.
19 EN
menu. Further