Plusmed pM-KN01 Mode D'emploi page 21

Oxygen flow (L/mln)
Oxygen concentration
(%)
Outlet pressure (Mpa)
Alarm
Sound level (dBA)
LCD display
Large LCD display
Electrical category:
Product category:
Net Weight (Kg)
Fuse
2) Nasal oxygen tube
Nasal oxygen tube is made up of intubatton, oxygen tube, inlet oxygen tube, movable gripper tube and nasal tube.
And it is made of medical PVC.There are two tips, over ear style. It must be flexible hose, transparent and clean. There
is no impurities and no kink. When inputting the 50Kpa pressure the nasal oxygen tube must be non-disclosure con-
tinued 15S.The various components can withstand vertical stress of 20N in 15S without break. With Ethylene oxide
sterilization, since the date of sterilization, the nasal oxygen tube could be saved for three years.
3) Humidifier
The humidifier must be colorless and transparent or translucent. And it is marked with the maximum and minimum
liquid level instruction line. It should not be broken when it withstands the pressure of not less than 0.4Mpa.
Power failure low & high pressure ;
accumulating timing; present timing; timing;
Switch times; pressure digital(accuracy:0.001MPa);
accumulating timing(range:0-10000hours);
present timing(accuracy:1 minute);
presetting timing(accuracy:1 minute)
0-5
93%±3%
0.04—0.07
≤50
Class II Type B
Class II a
26
T6.3AL/250V
21