Photocell; Eye- Cell Pre-Flash Setup - Elinchrom Ranger Quadra RX AS Manuel D'utilisation

Photocell – Basic Functions
Press 1x Scroll to select function
Photocell / Eye-Cell Setup - Anti-Red-Eye Pre-Flash Learning Mode
Press 1x Press 1x
Special Photocell – Eye-Cell Setup (manual pre-flash configuration)
Photocell / Eye-Cell - Pre-Flash Time Frame Setting - Advanced users only!
Press 1x Press 2x
Photocell / Eye-Cell - Pre-Flash Block Time Setting - Advanced users only!
Press 1x Press 3x
12
Scroll to select
function
Scroll to
change value
Scroll to
change value
Photozelle OFF
Photozelle ON
Photocell Pre-Flash Mode (shows the
mode) To change values, please follow
Make a test exposure and release camera
The Ranger Quadra Photocell will recognize
Flash function is now active
are inside the time frame
Standard value = 4
Pre-Flash Block -Time:
to set the minimum delay between each
Eye cameras) Standard value = 1