Cleaning And Maintenance - Rotel POWERPRO 6081CH Mode D'emploi

 CLEANING AND MAINTENANCE
o Detach the accessory from the sub-unit, and then press the
release button (2) of the dust cup (1) to separate it from the
sub-unit.
o Grasp the filter handle (3) and remove the filter assembly (4) from the dust cup, and
then empty the dust cup and rinse it with water. Finally, wipe the residual water from
the dust cup.
o Grasp the filter handle (3) and rotate it anticlockwise to remove the HEPA filter (5),
and then empty the filter cover (6) and rinse it with water. Finally, wipe the residual
water from the filter cover.
o Clean the HEPA filter (5) with water if the appliance is working inefficiently. Dry it com-
pletely after cleaning.
o NOTE: HEPA filters and other spare parts can be purchased from the vacuum cleaner
retailers.
o After cleaning the dust cup assembly, please install the
HEPA filter into the filter cover first, and then put them into
the dust cup. Then, install the dust cup into the sub-unit.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
39