Denon DRA-F100 Mode D'emploi page 13

Setting the Timer
The power can be set to turn on and off every day at the same time in any of five modes: tuner, CD, cassette deck, MD
player and air check (recording from the radio). (Preset the AM or FM station beforehand.)
TUNING UP and DOWN buttons
Receiver (DRA-F100)
PERSONAL COMPONENT SYSTEM / AM-FM STEREO RECEIVER DRA-F100
B
REMOTE SENSOR
TIMER
TUNED STEREO
SYSTEM
ON / STANDBY
TUNING MONO /
DOWN UP BAND STEREO
PHONES
TIMER DISPLAY MEMORY FUNCTION
TIMER button MEMORY button
Example: Setting the tuner to turn on at 2:35 p.m., off at 2:56 p.m. (with FM 87.5 MHz preset at channel "3")
Press the SYSTEM power operation
ON / STANDBY
switch (SYSTEM ON/ STANDBY) on
1
the receiver to turn on the system's
power.
TIMER
Press the TIMER button for at least
2
3 seconds to set the timer setting
mode.
DOWN
Use the TUNING UP and DOWN
3
buttons to set the "TUNER" mode.
MEMORY
4
Press the MEMORY button.
Use the TUNING UP and DOWN
DOWN
5
buttons to set the preset channel
number.
MEMORY
6
Press the MEMORY button.
Use the TUNING UP and DOWN
DOWN
7
buttons to set the hours for the
timer on time.
VOLUME
MHz CH
AUTO
BASS TREBLE BALANCE
L R
SYSTEM
MHz
TUNED
Say that FM 90.00 MHz is tuned in at preset
channel number "1".
TIMER
TUNING
UP
TIMER
Flashes
MHz
TIMER
TUNING
UP
TIMER ON
Flashes
(If the timer has already been set, that number
flashes.)
TUNING
UP
TIMER ON
Flashes
8
Press the MEMORY button.
Use the TUNING UP and DOWN
9
buttons to set the minutes for the
timer on time.
10
Press the MEMORY button.
Use the TUNING UP and DOWN
11
buttons to set the hours for the
timer off time.
CH
12
Press the MEMORY button.
Use the TUNING UP and DOWN
13
buttons to set the minutes for the
timer off time.
14
Press the MEMORY button.
CH
15
Press the TIMER button.
Press the SYSTEM power operation
switch (SYSTEM ON/STANDBY) on
16
the receiver to turn off the
system's power.
If the mark is displayed after the TIMER button is pressed, the timer will operate at the same times every day. To
turn the timer off, press the TIMER button again to turn the
The standby mark (" ") will not light if the current time is not set. If this is the case, set the current time, then press
the TIMER button.
MEMORY
TIMER ON
Flashes
(If the timer has already been set, that number
flashes.)
TUNING
DOWN UP
TIMER ON
Flashes
MEMORY
TIMER OFF
Flashes
TUNING
DOWN UP
TIMER OFF
Flashes
MEMORY
TIMER OFF
Flashes
(If the timer has already been set, that number
flashes.)
TUNING
TIMER OFF
DOWN UP
Flashes
(If the timer has already been set, that number
flashes.)
MEMORY
TIMER
TUNED
The display returns to as it was before the
timer setting mode was set.
Lights
TIMER
TIMER
TUNED
SYSTEM
ON / STANDBY
TIME
TIMER
mark off.
NOTE:
ENGLISH
MHz CH
MHz CH
OFF
13