Getting To Know Your Instrument - Beurer medical BC 32 Mode D'emploi

Contents

1. Getting to know your instrument ......................................... 12

2. Important information .......................................................... 12
3. Unit description ................................................................... 15
4. Prepare measurement ......................................................... 16
5. Measuring blood pressure ................................................... 16
Dear Customer,
Thank you for choosing one of our products. Our name stands
for high­quality, thoroughly tested products for the applications
in the areas of heat, weight, blood pressure, body temperature,
pulse, gentle therapy, massage and air.
Please read these instructions for use carefully and keep them
for later use, be sure to make them accessible to other users
and observe the information they contain.
Best regards,
Your Beurer Team
1. Getting to know your instrument
Check that the device packaging has not been tampered with and
make sure that all contents are present.
The wrist blood pressure monitor is used for non­invasive meas­
urement and monitoring of adults' arterial blood pressure.
You can use it to measure your blood pressure quickly and
easily, storing the results and displaying the progression of
readings. A warning is issued for anyone suffering from cardiac
arrhythmia.
The recorded values are classified and evaluated graphically.
ENGLISH
6. Saving, retrieving and deleting results ................................ 18
7. Error messages / troubleshooting ......................................... 19
8. Cleaning and storing the device and cuff ............................ 19
9. Technical details .................................................................. 19
2. Important information
Signs and symbols
The following symbols are used in these instructions for use,
on the packaging and on the type plate for the device and
accessories:
12
Caution
Note
Note on important information
Follow instructions for use
Type BF applied part
Direct current