Télécharger Imprimer la page

Miele STB 305 TurboTeQ Mode D'emploi page 92

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
en-US
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Turbobrush features
The Turbobrush is operated by the suc-
tion power of the vacuum cleaner.It has
a rotating roller brush which is very ef-
fective at picking up thread, hairs and
fluff. Four rollers maintain the brush
1/16" (1.5 mm) away from the floor.
Recommended use
The Turbobrush should not be
used for vacuuming deep-pile rugs
and carpets or valuable hand-knot-
ted rugs and carpets, e.g. Persian
and oriental rugs, etc. There is a
danger of the threads being pulled
out.
Do not use the Turbobrush to
clean highly variable or uneven
floors. The brush might come into
contact with the floor and cause
damage.
The Turbobrush is particularly suitable
for vacuuming thread and hair from
short pile carpeting.
The standard floorhead or one of the
Miele floorbrushes should be used for
cleaning hard floors.
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
92
Using the Turbobrush
 To achieve the best effect, pass the
Turbobrush slowly backwards and
forwards over the carpet or floor cov-
ering.
For carpets with fringes always draw
the Turbobrush from the carpet across
the fringe towards the rest of the floor.
Securing the Turbobrush
(Fig. 01)
 Instead of the usual floor attachment,
fit the Turbobrush to the suction tube,
turning it clockwise or counter-clock-
wise until it clicks into position.
Opening the air inlet valve
(Fig. 02)
The brush is operated by the suction
power of the vacuum cleaner. With
deeper, dense pile carpets the roller
brush may rotate more slowly. This is
caused by the carpet pile creating a
seal around the mouth of the Turbo-
brush and hindering the flow of air. This
will affect how well the carpet is
brushed.
 To increase the airflow, open the air
inlet valve (top illustration).
In all other situations the air adjustment
slide should be closed, to benefit from
the full suction power.
 Close the air inlet valve (bottom illus-
tration).

Publicité

loading

Ce manuel est également adapté pour:

Stb 305-3 turboteq