Intended Use; Product Features; Technical Data - Work Men WMMT200-14TB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Intended Use

The power tool is intended for sawing and
separating wooden materials, plastic, plaster, non-
ferrous metals and fasteners (e.g. nails and clamps)
as well as for working on soft wall tiles and for dry
grinding of small surfaces. It is especially suitable
for working close to edges and for flush cutting. The
power tool must be used with WORK MEN
accessories only.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
3 Venting slots
4 Tool holder
5 Plunge saw blade
6 Clamping bolt with washer
7 Allen key
8 Sanding plate
9 Sanding sheet
10 Segment saw blade
*The accessories illustrated or described are not
included as standard delivery.

Technical Data

Mains voltage V
Mains frequency Hz
Rated power input
Output power
Oscillation angle, left/right °
Weight
Protection class/
Acoustic pressure level
LpA 83 dB(A) K =3 dB(A)
Acoustic power level
LwA 94 dB(A) K = 3 dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : 5.87 m/s²
230-240
50
W
200
n0 tr/min15000-22000
1.5
kg
1.4
II
ATTENTION !
must be worn.
K =1.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
22

Publicité

Table des Matières
loading

Table des Matières